TZ-6106 Water-proof and Oil-proof Built-in CM Horizontal Limit Switch
Features
Built-in CM horizontal limit switch
High mechanical strength, mainly consists of aluminum cast
Water-proof and oil-proof construction
Same rated value and characteristic with CM horizontal limit switch
Various actuators for different applications
Ratings
Rated Voltage | Noninductive Load (A) | Inductive Load (A) | ||||||
Resistance Load | Lamp Load | Inductive Load | Motor Load | |||||
NC | NO | NC | NO | NC | NO | NC | NO | |
125VAC | 5 | 5 | 1.5 | 0.7 | 3 | 3 | 2 | 1 |
250VAC | 5 | 5 | 1 | 0.5 | 3 | 3 | 1.5 | 0.8 |
8VDC | 5 | 5 | 3 | 3 | 5 | 4 | 3 | 3 |
14VDC | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
30VDC | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
125VDC | 0.4 | 0.4 |
|
|
|
|
|
|
250VDC | 0.2 | 0.2 |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Inrush Current |
|
| N.C: below 24A, | N O: below 12A |
|
| ||
NOTES: Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec. max.(DC).
2. Lamp load has an inrush current of 10 times the steady-state current while motor load has an inrush current of 6 times the steady-state current
3. Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring.
Characteristics
Operation speed | 5mm-0.5m/s |
Operating frequency | Electrical: 20 operations/min |
Contact resistance | 25m Ω max. (initial value) |
Insulation resistance | 100mΩmin. (below 500VDC) |
Dielectric strength | 1500V^C, 50/60 Hz for 1 minute between current-carrying and non -current-carrying metal parts |
1500V^C, 50/60 Hz for 1 minute between current-carrying and non -current-carrying metal parts | |
1500V^C, 50/60 Hz for 1 minute between each terminal and ground | |
Vibration | 10-55Hz, 1.5mm double amplitude |
Shock | Mechanical durable: 1, 000m/Sec2 (about 100G'S) Malfunction: 300m/Sec2 (about 30GS) |
Ambient temperature | Using: -20-+80ºC (With no icing) |
Humidity | <95% RH |
Electrical life | 500,000 operations above |
Protection level | IP66 |
NOTES: The default size of conduit connector is M20x1.5, outfiting cable connector. Conduit connector size is PG13.5, with product model nurrber plus (-P), example:TZ-6104-P.
Operating Characteristics
Model | TZ-6 | TZ-6001 | TZ-6002 | TZ-6003 | TZ-6004 | TZ-6043 | TZ-6101 | TZ-6102|TZ-6103 | TZ-6104 | TZ-6143 |
Operating force | OF(Max.) | 250~350g | 250~350g | 570g | 570g | 800g | 500g | 640g | 640g |
Release force | RF(Min.) | 114g | 114g | 170g | 170g | 240g | 100g | 230g | 230g |
Pre-travel | PT(Max.) | 0.4mm | 0.5mm | 4mm | 4mm | 2mm | 1mm | 5mm | 5mm |
Movement differential | MD(Max.) | 0.05mm | 0.05mm | 0.4mm | 0.4mm | 0.1mm | 0.12mm | 0.4mm | 0.4mm |
Over travel | OT(Min.) | 5.5mm | 3.6mm | 6mm | 6mm | 5mm | 3.5mm | 6mm | 6mm |
Operating Position | OP(mm) | 38.2 ± 0.8mm | 49.7 ± 1mm |
|
| 45.8 ± 0.8mm | 49.7 ± 0.8mm |
|